| View previous topic :: View next topic |
| Author |
Message |
samawake Making a go of it.
Joined: 09 Aug 2008 Posts: 18 Location: Riverside, California
|
Posted: Sat Feb 06, 2010 4:12 am Post subject: clutch cover |
|
|
| i was wondering if anyone has ever put a 2002 clutch cover on a 2000 e model the part numbers are different i found a good deal on one but i cross referenced the years and for some reason 2002 and 2003 are diferent then 98 thru 2001 thanks |
|
| Back to top |
|
 |
Grunty-Motor Site Admin

Joined: 16 Sep 2003 Posts: 1414 Location: Aberdeen
|
Posted: Sat Feb 06, 2010 2:48 pm Post subject: |
|
|
maybe the colour????
gaskets are the same _________________
 |
|
| Back to top |
|
 |
yorkie Forum Tramp

Joined: 21 Sep 2003 Posts: 1307 Location: BlueZX 9C2 & 12B4 Altofts, west yorkshire
|
Posted: Sat Feb 06, 2010 3:01 pm Post subject: |
|
|
Yes your right the numbers are different and the cover looks slightly modifyed, if it were me I'd take the chance and say it would fit.
I had both diagrames up and flicked from one to the other showing a little more bracing on the F model in the middle. _________________ zx-9r.net |
|
| Back to top |
|
 |
samawake Making a go of it.
Joined: 09 Aug 2008 Posts: 18 Location: Riverside, California
|
Posted: Sat Feb 06, 2010 6:16 pm Post subject: |
|
|
| ok i guess ill take the chance it will only cost me 20 dollers us plus the price of the gasket thanks yorkie |
|
| Back to top |
|
 |
yorkie Forum Tramp

Joined: 21 Sep 2003 Posts: 1307 Location: BlueZX 9C2 & 12B4 Altofts, west yorkshire
|
Posted: Sat Feb 06, 2010 7:46 pm Post subject: |
|
|
Like I say it worth a shot, you'll easy sell it back on again if it slips the clutch because its to close to the clutch push rod.
Keep us informed on how it goes.  _________________ zx-9r.net |
|
| Back to top |
|
 |
OneShadeOfGreen Club Racer
Joined: 11 Feb 2010 Posts: 92 Location: Derbyshire
|
Posted: Thu Feb 11, 2010 11:54 pm Post subject: |
|
|
It'll fit no bother  _________________ Impoverished Pippit |
|
| Back to top |
|
 |
|